Plunge Routers vs Fixed Routers

Advertiser Disclosure: Tool Inspector earns commissions from qualifying purchases.

Which router is right for you? This is a question that plagues many first-time router shoppers. Do you want the stability of a fixed router or the flexibility of a plunge router? In this post, we’ll break down the pros and cons of both to help make your decision easier.

 

What is the Difference between Plunge Routers and Fixed Routers?

Here are some key differences between plunge routers and fixed routers:

  • Plunge routers are used when you need to make a cut that starts in the middle of your workpiece.
  • Fixed routers are used when you need to make a cut along the edge of your workpiece.
  • Plunge routers are also good for making cuts that are not perpendicular to the edge of your workpiece, while fixed routers are better for making cuts that are perpendicular to the edge.
  • Plunge routers are easier to use for making dovetail joints, while fixed routers are better for making mortise and tenon joints.
  • Plunge routers can be used for making raised panel doors, while fixed routers are better for making flat panel doors.
  • Plunge routers are better for making moldings and other decorative cuts, while fixed routers are better for making functional cuts.
  • Fixed routers are generally more powerful than plunge routers.
  • Plunge routers are generally more versatile than fixed routers.
  • Both plunge routers and fixed routers can be used for making cuts in wood, plastic, and aluminum.
  • Plunge routers are better for making cuts in soft materials, while fixed routers are better for making cuts in hard materials.
  • Plunge routers are typically more expensive than fixed routers.
  • Fixed routers are typically more difficult to use than plunge routers.

 

Which router you use will depend on the specific project you’re working on. There is no one “right” answer for when to use a plunge router vs. a fixed router.

 

Ultimately, it comes down to personal preference and what you feel most comfortable using. Experiment with both types of routers to see which one works best for you.

 

When Do You Use a Plunge Router vs a Fixed Router?

Plunge routers have the ability to move up and down, allowing them to be used for tasks such as carving out deep recesses or shaping edges. Fixed routers, on the other hand, are designed to stay in one place, making them ideal for tasks that require more precision.

 

When it comes to power, fixed routers tend to be more powerful than plunge routers. This is because they do not have to worry about moving up and down, so all their power can go into spinning the bit. Plunge routers are still very powerful, but they cannot match the raw power of a fixed router.

 

There are advantages and disadvantages to both types of routers. It really comes down to what you need to use it for. If you need a router that can move up and down, then a plunge router is the way to go. However, if you need more power and precision, then a fixed router is the better choice.

 

What Are Some of the Benefits of Using a Plunge Routers vs Fixed Routers?

When it comes to routers, there are two main types: fixed and plunge. Both have their own set of benefits that make them ideal for different woodworking tasks. Here’s a closer look at the benefits of each type of router:

 

Plunge Routers

Plunge routers are ideal for making precise, deep cuts into the wood. This is because you can control the depth of the cut by adjusting the router’s plunge mechanism. Plunge routers are also great for making freehand cuts since you can start and stop the cut at any point.

 

Fixed Routers

Fixed routers are best for making shallow cuts or for routing along a straight edge. This is because they have a fixed depth stop, which means you can’t adjust the depth of the cut. Fixed routers are also more stable than plunge routers, so they’re less likely to veer off course.

 

So, which type of router is best for you? It depends on the type of cuts you’ll be making. If you need to make precision cuts or freehand cuts, then a plunge router is the way to go.

 

If you are mainly doing straight routing, then a fixed router will be more suitable.

 

Which One is Better for Your Project?

When it comes to choosing between a plunge router and a fixed router, there are a few things you need to consider.

 

The most important factor is the type of project you’re working on. If you’re doing something that requires a lot of precision, like making raised panel doors, then a plunge router is the best choice.

 

However, if you’re working on a simpler project that doesn’t require as much precision, then a fixed router will be just fine.

 

Other things to consider include the depth of your cuts and the size of your router bit. Plunge routers can make deeper cuts than fixed routers, so they’re better suited for larger projects.

 

Finally, plunge routers are more expensive than fixed routers, so if you’re on a budget, a fixed router is the way to go.

 

Pros and Cons of Plunge Router and Fixed Routers

There are two main types of routers – plunge and fixed. Each has its own advantages and disadvantages that you should consider before making a purchase.

 

Plunge Routers

Plunge routers are great for making precise, intricate cuts. They’re also easy to use and can be operated with one hand. However, they’re more expensive than fixed routers and can be difficult to control if you’re not experienced.

 

Fixed Routers

Fixed routers are more versatile than plunge routers and can be used for a variety of tasks. They’re also less expensive and easier to control. However, they’re not as precise as plunge routers and can be more difficult to use for intricate cuts.

 

Final Thoughts

Routers come in all shapes and sizes, but most Home Users will be using one of two types: the plunge router or the fixed router. So what’s the difference? We hope this article answered your question, and if you have any more questions, you can read our blog!