How to Put Sandpaper on an Orbital Sander

Advertiser Disclosure: Tool Inspector earns commissions from qualifying purchases.

If you’re working with wood, you know that sandpaper is a must-have. But what about when you’re using an orbital sander? In this post, we’ll show you how to put sandpaper on orbital sander the right way.

 

There are two things you need to keep in mind when putting sandpaper on an orbital sander: the type of sandpaper and the size of the sander.

 

Types of Sandpaper

The type of sandpaper you’ll need will depend on the material you’re working with. For example, if you’re working with softwood, you’ll need a different paper than if you’re working with hardwood.

 

Hardwood Sandpaper

Hardwood sandpaper is designed for use on hardwoods, such as oak and maple. The abrasive particles are bonded together with a resin, making it durable and long-lasting.

 

Hardwood sandpaper can be used for a variety of applications, including finishing, polishing, and rust removal.

 

Softwood Sandpaper:

This type of sandpaper is made with a resin bond that is designed to be strong and durable. The abrasive particles are also very fine, so they can remove a lot of material without damaging the surface. To make sure that the paper is properly bonded to the backing material.

 

If you’re not sure what type of sandpaper you need, ask a professional at your local hardware store. They’ll be able to help you choose the right paper for your project.

 

Size of Sandpaper

As for the size of the sander, you’ll need to make sure that the paper is big enough to fit. Most sanders will take a standard size sheet of sandpaper, but there are some that are larger or smaller.

Now that you know what to keep in mind, let’s get started.

 

How to Put Sandpaper on Orbital Sander

If you’re wondering how to put sandpaper on an orbital sander, the process is actually quite simple. Just follow these steps, and you’ll be sanding like a pro in no time.

 

Choose the right grit of sandpaper for your project

The next thing you need to do is figure out what grit of sandpaper you need. The higher the number, the finer the sandpaper. If you’re not sure, it’s always better to start with a higher number and work your way down.

 

If you’re working with wood, you’ll want to start with a coarse grit like 60 or 80. For metal, start with a medium grit like 120. And for plastic, start with a fine-grit like 220.

 

Cut a piece of sandpaper to fit the surface of your orbital sander

Now that you have your sandpaper, it’s time to attach it to the sander. Most orbital sanders have a Velcro backing, so all you have to do is peel off the paper backing on the sandpaper and stick it to the sander. Once it’s attached, start sanding away!

 

If you’re working with a particularly large or awkward piece of sandpaper, you may need to use some masking tape to secure it in place. Just be sure not to tape over any of the moving parts on the sander, as this could cause damage.

 

Wet the surface of the wood you’re sanding

If you’re working with a piece of wood that’s particularly delicate, wetting the surface before you start sanding can help to prevent any damage.

 

Simply use a damp cloth to lightly wet the surface of the wood, and then allow it to dry for a few minutes before starting to sand. This will help to protect the wood and keep it from splintering or tearing as you sand.

 

Attach the sandpaper to the orbital sander

If you’re using adhesive-backed sandpaper, start by peeling off the paper backing. Then, line up the sandpaper with the sander’s pad, and press it down firmly.

 

If you’re using hook-and-loop sandpaper, align the holes in the sandpaper with the hooks on the sander’s pad, and press it down firmly. Once the sandpaper is attached, you’re ready to start sanding.

 

Keep checking your progress and switch to a finer grit if needed

As you sand, keep checking your progress and switch to a finer grit if needed. Remember to always sand with the grain of the wood, not against it.

 

Tips and Tricks on Using Sandpaper on an Orbital Sander

If you’re looking to get a smooth finish on your woodworking projects, then using an orbital sander with sandpaper is the way to go. Here are some tips and tricks on how to get the best results.

  • When choosing sandpaper, always go for a higher grit number. The higher the number, the finer the sandpaper will be.
  • If you’re working with a particularly hard or rough piece of wood, start with a lower grit number and then work your way up.
  • Don’t apply too much pressure when sanding. Let the sander do the work for you.
  • Be sure to keep the sander moving in order to avoid creating any deep scratches.
  • When you’re finished sanding, always wipe down the surface to remove any dust or debris.

 

Following these tips, you’ll be able to achieve a smooth, professional finish on your woodworking projects. So don’t be afraid to break out the orbital sander and get to work!

 

Final Thoughts

Now that you know how to put sandpaper on an orbital sander, you’re ready to get started with your next project. With a little practice, you’ll be able to get a smooth, even finish on your workpiece.

 

Remember to keep the pressure even and to move the sander in a consistent pattern. With a little patience, you’ll be able to achieve great results. Thanks for reading, and good luck!